The Weaver® W-M894XS tire changer includes our popular W-894XS tire changer with the W-MC/ATV Adapter set.
This powerful combination allows for full coverage of motorcycles, atvs, cars and trucks with wheel clamping range from 6" thru 24" (Minimum Mount Demount Range: 8").
Built-in Bead Blaster included.
FREE SHIPPING! Includes Free Residential and Free Lift Gate Service!
The Weaver® W-M894XS Tire Changer has become one of America's Best Selling Tire Changers over the last 12 years. Now with BLACK ARMOUR™ turntable wheel protection included. Why have they become so Popular? As our reviews confirm, Weaver® Tire Changers are Strong on tough tires, Reliable in demanding shops, have a Delicate Touch on nice rims. All Weaver® tire changers and balancers are manufactured by Nexion, the Italian company that invented the first wheel clamp tire changer in 1962. But we don't stop there! It is a 30+ year tradition that we take care of our customers after the sale with a huge parts inventory and Great Customer Service.
The W-M894XS is the perfect professional grade wheel clamp tire changer for the general repair shop or car enthusiast. The W-M894XS incorporates foot-pedal operated wheel clamp operation, bead breaker, turntable operation and bead blaster inflation system. The economical price of the W-M894XS tire changer combined with the professional grade quality, makes it one of our best selling machines.
Included with this model is the W-MC/ATV Adapter set to allow coverage of Motorcycle and ATV wheels. Check the specification tab on this page to see the rim size coverage gained with this adapter set.
Check Out these 5 New Features on XS Models:
- Stainless Steel Bead Breaker Cylinder for Longer Service Life
- Faster Bead Breaker with Quick Deflation Valves Improves Cylinder Speed from 6 seconds to 3 seconds
- New Bead Breaker Force is Increased by 1.5 times
- Larger Hex Bar Support to Resist Flex on Tough Low Profile Tires - Was 36mm now 41mm doubling the strength.
- X shape turntable with BLACK ARMOUR™ turntable wheel protection. Provides cutouts for better visibility under the wheel when clamping the outside of the rim.
Which Weaver® Tire Changer is Right for you? (See chart below)
The only difference between the W-894XS and the W-898XS is the Clamping Range and Turntable Size.
*Note - Clamping ranges shown are not wheel sizes, they are clamp measurements. Outside clamping is the typical method used to protect nice wheels.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-898XS it will open to 30" when clamping from the outside of the wheel. This means you could likely do most 28" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-894XS it will open to 26" when clamping from the outside of the wheel. This means you could likely do most 24" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
PRODUCT SPECS FOR W-C-M-0400000 MC/ATV ADAPTERS
- W-893 / 894 Series using inverted position: 7.5"-19"
- W-893 / 894 Series using reverted position: 14"-26"
- W-898 Series using inverted position: 10.25"- 23"
- W-898 Series using reverted position: 17"-30"
Note - The Bead Blaster will be out of position to assist seating the beads when using this adapter set.
The Weaver® W-894XS is manufactured by Nexion and carries a 1-year limited warranty. Nexion is the Italian Manufacturer Nexion SpA which owns the Italian Brands; Corghi, HPA Faip, Mondolfo Ferro, Orlandini, Sice, Tecnomotor, Teco and Bright. Nexion is a worldwide leader in wheel service equipment since 1962 and is recognized internationally for their reliable and accurate products due to the oversight by the Italian Design Engineers. All wheel clamp style tire changers in the world are a result of Italian invention.
All Weaver® Brand Equipment is manufactured in ISO9001 certified factory with products that have earned the CE certification as labeled on every machine. Nexion has consistently built and provided components to some of the largest brand name products throughout Europe, Asia and the USA including Bend Pak tire changers, Ranger tire changers, Corghi tire changers, Dunlop tire changers, Bosch tire changers and many more. We are simply providing some of their best products Direct to you at the lowest possible price.
Parts are in stock for immediate support on all of our Weaver® models. We have sold and serviced these models since 2007 with an excellent track record and warranty levels that are consistently at or below the Big Brand names. We believe all of our Weaver® branded products provide the highest quality at an unbeatable price. Since 1984, Derek Weaver Company has only carried products that we can stand behind with confidence to deliver the results we all desire.
FEATURES
- Manual mount/demount
- Fast Swing-Arm Style
- Four pneumatic clamps and double acting cylinders
- Side mounted bead breaker
- Bead seating inflation jets in clamping jaws
- Lubricator, water separator and air pressure regulator
- W-MC/ATV Adapters are included
PRODUCT SPECS
- Max. Tire Diameter: 49"
- Max. Bead Breaker Rim Width: 3" - 15"
- Inside Clamping Range: 12"-24"
- Outside Clamping Range: 10"- 22"
- Compressor Working Pressure: 5 CFM @ 150-175 psi, Machine Regulator set to 140 psi
- Power Supply: 1.5 HP 110 Volt 20 amp, 2500 watts for generators
- Bead Breaker: 5500-lbs.
- Shipping Weight: 555-lbs.
- With W-MC/ATV Adapter Range Reverted: 12" - 24"
- With W-MC/ATV Adapter Range Inverted: 6" - 18"
- Minimum Mount Demount Range: 8"
- Some wider tires may require an optional swing arm spacer
Warning: Never exceed 40 PSI while seating beads! Never inflate tire above manufacturer's recommended pressure after bead is seated.
The Weaver® W-M894XS is proudly manufactured by the Italian Group Nexion SpA. Nexion comprises nine major Italian wheel service brands: Corghi®, HPA Faip®, Mondolfo Ferro®, Orlandini®, Sice®, Tecnomotor®, Teco®, Bright®, and Stenhoj®. Based in Italy, Nexion has operations worldwide, including manufacturing centers in Italy, Europe, and Asia.
Videos Hide Videos Show Videos
Derek Weaver Company is proud to offer our high quality products with free shipping or warehouse pickup. Here's how it works...
PRODUCTS MARKED FREE SHIPPING
All Products on our website are offered with "Free Shipping". This means the freight charges are included in the price. Most of our products weighing less than 800-lbs. are offered with “Absolute Free Shipping” which means there are no extra fees. In this case you will notice the phrase “FREE SHIPPING! Includes Free Residential and Free Lift Gate Service!”, in the description of the products page. Absolute Free Shipping also means there are no additional fees for Liftgate Service or Residential Delivery. The only additional fee that you may incur would be if the address were changed during shipment which would incur a reconsignment fee by the freight carrier that we would only pass on if it were not our mistake.
For equipment over 800-lbs (most 2 & 4-Post lifts) there are some limitations for Free Shipping depending on weight and delivery location. In this case you will notice the phrase “Free Shipping To Over 85% of the USA - See Where It's Free” in the description of the products page. Most of the USA will require no additional fee. This applies to over 85% of the continental USA (lower 48 states). Free shipping does not apply to Alaska or Hawaii. Some parts of the country are affected by higher freight rates due to the combination of weight and delivery location which will require a small additional charge to cover the higher rate charged by the freight carriers. Our shopping cart will not calculate the difference (added fee), so we will contact you if this is the case. Rather than advertise the higher rates across the board we choose to show the lowest possible cost to most of the country. Like “Absolute Free Shipping” there will be no extra charge for lift gate or residential delivery. The following areas may have additional freight: North Western US, North Eastern US, Long Island, Western Colorado, the Dakotas, some parts of Florida & California and any area deemed a remote location by the freight company. Prior to ordering give us a call at 817-560-9510 or email and we can provide accurate information regarding Free Shipping or any additional charges.
FREIGHT CONSIDERATIONS
Shipping and delivery time given during the freight quote process is an estimated time of delivery given by the carrier. Choosing Liftgate Delivery may extend delivery times due to limited liftgate equipment at the delivering terminal. Meeting the delivery schedule is subject to the day the freight is shipped and the carrier’s ability to meet their schedule. Derek Weaver Co., Inc. does not guarantee that a carrier can meet their projected delivery time but we will provide you with the proper tracking information by email so you can follow the tracking time and arrange for special delivery needs with the carrier as needed. Any additional fees incurred as a result of consignee being unable to meet scheduled delivery time or cause for redelivery or reconsignment to a different location will be at consignee’s expense.
RESIDENTIAL DELIVERY:
Choosing Residential may extend the estimated delivery time due limited liftgate trucks at the delivering terminal, additional communication and handling by the freight company. Please keep this in mind when choosing residential delivery.
UNLOADING THE FREIGHT TRUCK:
Make sure you can unload the freight. A forklift or lifting equipment is required for items over 800-lbs. The trucking company is only responsible for delivery to your loading dock if delivered to a business address or curbside if a residential lift gate delivery. Lift gate service is available for some equipment and can assist in unloading 2 and 4-post lifts however you will still need a forklift. Liftgate capacity is typically 1000-lbs and cannot unload a 2 or 4-post lift on its own.
PICKUP AT YOUR LOCAL FREIGHT TERMINAL:
If you are unable to unload a truck, we have the option of letting you pick the freight up at the closest terminal to your location. When picking up at a terminal, the freight company will load your truck or trailer for you which is included in the freight cost. Call our office (1-817-560-9510) to determine the location of the closest terminal. If you require terminal pickup please place a note in the comment box requesting terminal pickup and we will contact you with the terminal location. Covered trailers or trailers with ramps are not acceptable as they prevent the forklift from getting the load into the trailer. They will not drive onto a ramped trailer. Please remove the ramps prior to picking up if possible.
All shipments must be inspected immediately upon receipt
IF AN ITEM HAS FREIGHT DAMAGE OR SCRATCHES
1) ACCEPTING AN ITEM WITH FREIGHT DAMAGE OR SCRATCHES.
Choose this option if you have minor dings and scratches or a part that needs replaced to make the unit satisfactory. Make note of the damage before you sign the freight bill. You will be responsible for filing the freight damage claim with the carrier. Derek Weaver Co, Inc. will provide any replacement parts or touch up paint needed should you choose this option and the carrier should provide for reimbursement. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510
2) REFUSE THE DAMAGED ITEM.
Choose this option if the carrier has severely damaged the freight beyond your judgment of a simple repair. Derek Weaver Co, Inc. will file all freight claims. Get a copy of the freight bill from the truck driver and email it with a brief explanation of the situation to us. A replacement will be shipped as soon as we verify possession of the freight with the carrier.
SCHEDULING A WAREHOUSE PICKUP
If you would like to pick-up the item at one or our warehouses, please call ahead to make sure the item is in stock and schedule your pick-up. Picking up at our warehouse will save you in freight fees but will require sales tax to be collected. If you do not see a pickup price on our website for the product you are interested in you may call our office for more information.
In Texas we load Monday – Friday by appointment only.
In North Carolina we load Monday – Friday by appointment only.
All Two Post and Four Post Lifts require trailer for pickup. Be prepared for pick-up by understanding the item’s weight and dimensions and using the proper truck and/or trailer for hauling. We cannot load open or enclosed trailers with ramp gates. Our warehouse will load the item onto your vehicle and/or trailer but is not responsible for properly securing the load on your vehicle and you will need to make sure you have the proper straps and equipment for hauling. All items for local pick-up are charged state sales tax at the appropriate local rate. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510
