Best Seller! Save Now!
- Swing arm style Manual mount/demount head
- Commercial Grade tire changer
- Four pneumatic clamps and double acting cylinders, clamps up to 28" automotive and light truck tires
- Side mounted bead breaker
- Powerful Bead Blaster seating inflation jets in clamping jaws
- Now with BLACK ARMOUR™ turntable protection.
- Lubricator, water separator and air pressure regulator
Which Weaver® Tire Changer is Right for you? (See chart below)
The only difference between the W-894XS and the W-898XS is the Clamping Range and Turntable Size.
*Note - Clamping ranges shown are not wheel sizes, they are clamp measurements. Outside clamping is the typical method used to protect nice wheels.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-898XS it will open to 30" when clamping from the outside of the wheel. This means you could likely do most 28" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-894XS it will open to 26" when clamping from the outside of the wheel. This means you could likely do most 24" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
PRODUCT SPECS FOR W-C-M-0400000 MC/ATV ADAPTERS
- W-893 / 894 Series using inverted position: 7.5"-19"
- W-893 / 894 Series using reverted position: 14"-26"
- W-898 Series using inverted position: 10.25"- 23"
- W-898 Series using reverted position: 17"-30"
Note - The Bead Blaster will be out of position to assist seating the beads when using this adapter set.
W-PL240 Power Assist Arm (click here for detailed description):
- Powerful pneumatic assist arm tire changer that attaches to the W-894XS & W-898XS Tire Changers
- 4 powerful ways to press/lift the bead, two roller arms, one press block and one lifting disc
- Powerful pneumatic lifting disc is interchangeable with press block
- Provides effortless mounting and demounting of tough low profile and run flat tires
- Main Cylinder is equipped with a bead pressing block for pushing the bead into place
- Lifting Disc attaches to main cylinder for raising the bead into place
- Makes changing the toughest automotive and light truck tires a one-man job
WARRANTY - All Weaver® Brand Wheel Balancers and Tire Changers carry a 1 Year Warranty. Our CE Certified Wheel Balancers and Tire Changers are NOT limited by this warranty and also carry a 1 Year Warranty on all Electronic Components. Weaver® Brand Wheel Balancers and Tire Changers are non-returnable/non refundable items. Warranty defects will be solved under the machine warranty. Beware of sellers who claim higher quality electrical components and yet will not warranty them beyond 90 days!
Videos Hide Videos Show Videos
13 Reviews
-
W-898XS TIRE CHANGER / ASSIST ARM COMBO
This is the first product and company, that I have felt the need write a positive comment on in a very long time. First the customer service is top notch, very refreshing. When I placed my order it was on a weekend, much to my surprise my tire changer and balancer arrived at my shop Thursday, just 4 work days later. I am located two States away. Now lets talk about the machines, top notch. I got just what I wanted, just what the literature claimed I would get. Best tire machines that I have ever used period.
-
This is a well built machine assembly was very easy to understand through the video that you provided I haven't used it yet I only did a couple steel wheels with it so far but the it worked perfect
I am more than happy with this machine and the price that can't be beat for what you get
-
I like
I like
-
W-MC/ATV Adapter for Weaver® Tire Changers
Well made and sweet to operate.
-
WEAVER® W-898XS TIRE CHANGER / ASSIST ARM COMBO
Very pleasant buying experience, communication was excellent, they followed through with everything they said they would and called me back to confirm the ship date. Tire changer shipped on time and came completely undamaged. Nothing was wrong with the changer and it worked as it should with no leaks or issues. It is a very nice changer and is built solid, very happy with the quality. Overall a great buying experience. My prior experience with a balancer was equally as good and the product continues to work great.
-
Tire changer
Great product arrived on time easy to set up work perfect with no issues so far
-
Tire machine
Received machine I one piece 2day delivered about ofd Dallas. Had previous smaller tire machine upgraded to bigger diameter and auxiliar arm
-
Great Product
Well worth the money! Excellent customer service!
-
Tire changer
Well made machine. I am well pleased with the quality of this changer and the people at Dereck Weaver that I purchased it from. I thought the price was fair for such a well built machine. The instructions could be a little bit clearer but there are videos from Weaver and You tube so really no big problem
-
Great value
Bought it for personal use, had the first tire off an hour after the crate arrived, easy to assemble!
-
One. Of best tire machines
This is the best Rim clamp machine out there thanks
-
Excellent value, features!
Purchased for my personal garage. Excellent value for the $$$, lots of features, customer service is outstanding from Derek Weaver!!!
-
Well Built Tire Changer For The Money!
Bought this tire changer for a small shop, works very well. Is constructed very well. Shipping was quick & simple. Would highly recommend this tire changer. Customer service was very helpful.
Derek Weaver Company is proud to offer our high quality products with free shipping or warehouse pickup. Here's how it works...
PRODUCTS MARKED FREE SHIPPING
All Products on our website are offered with "Free Shipping". This means the freight charges are included in the price. Most of our products weighing less than 800-lbs. are offered with “Absolute Free Shipping” which means there are no extra fees. In this case you will notice the phrase “FREE SHIPPING! Includes Free Residential and Free Lift Gate Service!”, in the description of the products page. Absolute Free Shipping also means there are no additional fees for Liftgate Service or Residential Delivery. The only additional fee that you may incur would be if the address were changed during shipment which would incur a reconsignment fee by the freight carrier that we would only pass on if it were not our mistake.
For equipment over 800-lbs (most 2 & 4-Post lifts) there are some limitations for Free Shipping depending on weight and delivery location. In this case you will notice the phrase “Free Shipping To Over 85% of the USA - See Where It's Free” in the description of the products page. Most of the USA will require no additional fee. This applies to over 85% of the continental USA (lower 48 states). Free shipping does not apply to Alaska or Hawaii. Some parts of the country are affected by higher freight rates due to the combination of weight and delivery location which will require a small additional charge to cover the higher rate charged by the freight carriers. Our shopping cart will not calculate the difference (added fee), so we will contact you if this is the case. Rather than advertise the higher rates across the board we choose to show the lowest possible cost to most of the country. Like “Absolute Free Shipping” there will be no extra charge for lift gate or residential delivery. The following areas may have additional freight: North Western US, North Eastern US, Long Island, Western Colorado, the Dakotas, some parts of Florida & California and any area deemed a remote location by the freight company. Prior to ordering give us a call at 817-560-9510 or email and we can provide accurate information regarding Free Shipping or any additional charges.
FREIGHT CONSIDERATIONS
Shipping and delivery time given during the freight quote process is an estimated time of delivery given by the carrier. Choosing Liftgate Delivery may extend delivery times due to limited liftgate equipment at the delivering terminal. Meeting the delivery schedule is subject to the day the freight is shipped and the carrier’s ability to meet their schedule. Derek Weaver Co., Inc. does not guarantee that a carrier can meet their projected delivery time but we will provide you with the proper tracking information by email so you can follow the tracking time and arrange for special delivery needs with the carrier as needed. Any additional fees incurred as a result of consignee being unable to meet scheduled delivery time or cause for redelivery or reconsignment to a different location will be at consignee’s expense.
RESIDENTIAL DELIVERY:
Choosing Residential may extend the estimated delivery time due limited liftgate trucks at the delivering terminal, additional communication and handling by the freight company. Please keep this in mind when choosing residential delivery.
UNLOADING THE FREIGHT TRUCK:
Make sure you can unload the freight. A forklift or lifting equipment is required for items over 800-lbs. The trucking company is only responsible for delivery to your loading dock if delivered to a business address or curbside if a residential lift gate delivery. Lift gate service is available for some equipment and can assist in unloading 2 and 4-post lifts however you will still need a forklift. Liftgate capacity is typically 1000-lbs and cannot unload a 2 or 4-post lift on its own.
PICKUP AT YOUR LOCAL FREIGHT TERMINAL:
If you are unable to unload a truck, we have the option of letting you pick the freight up at the closest terminal to your location. When picking up at a terminal, the freight company will load your truck or trailer for you which is included in the freight cost. Call our office (1-817-560-9510) to determine the location of the closest terminal. If you require terminal pickup please place a note in the comment box requesting terminal pickup and we will contact you with the terminal location. Covered trailers or trailers with ramps are not acceptable as they prevent the forklift from getting the load into the trailer. They will not drive onto a ramped trailer. Please remove the ramps prior to picking up if possible.
All shipments must be inspected immediately upon receipt
IF AN ITEM HAS FREIGHT DAMAGE OR SCRATCHES
1) ACCEPTING AN ITEM WITH FREIGHT DAMAGE OR SCRATCHES.
Choose this option if you have minor dings and scratches or a part that needs replaced to make the unit satisfactory. Make note of the damage before you sign the freight bill. You will be responsible for filing the freight damage claim with the carrier. Derek Weaver Co, Inc. will provide any replacement parts or touch up paint needed should you choose this option and the carrier should provide for reimbursement. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510
2) REFUSE THE DAMAGED ITEM.
Choose this option if the carrier has severely damaged the freight beyond your judgment of a simple repair. Derek Weaver Co, Inc. will file all freight claims. Get a copy of the freight bill from the truck driver and email it with a brief explanation of the situation to us. A replacement will be shipped as soon as we verify possession of the freight with the carrier.
SCHEDULING A WAREHOUSE PICKUP
If you would like to pick-up the item at one or our warehouses, please call ahead to make sure the item is in stock and schedule your pick-up. Picking up at our warehouse will save you in freight fees but will require sales tax to be collected. If you do not see a pickup price on our website for the product you are interested in you may call our office for more information.
In Texas we load Monday – Friday by appointment only.
In North Carolina we load Monday – Friday by appointment only.
All Two Post and Four Post Lifts require trailer for pickup. Be prepared for pick-up by understanding the item’s weight and dimensions and using the proper truck and/or trailer for hauling. We cannot load open or enclosed trailers with ramp gates. Our warehouse will load the item onto your vehicle and/or trailer but is not responsible for properly securing the load on your vehicle and you will need to make sure you have the proper straps and equipment for hauling. All items for local pick-up are charged state sales tax at the appropriate local rate. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510
